Secondary Containment: Stationary
Spill-pallets - 2 and 4 drum
- Meets EPA 40 CFR 264.175.
- Forkliftable.
- Non-skid removable grates for easy cleaning.
- 100% polyethylene.
- Low 12" profile or heavy load high profile.
Spill-deck: 1, 2, 4-barrel spill-deck with bladder
- Low 5 3/4" deck height - same as wooden pallets.
- Allows drum to be "jockeyed" onto spill-deck system when standard handling equipment is not available.
- Meets EPA Container Storage Regulation and Uniform Fire Code Spill Containment Regulations.
- Rugged, double layer polyethylene bladder.
Workstation - 2,4,6 or 8 drum & access ramp
- Designed for stand-alone use or combines with other workstations for a customize work area.
- Tough polyethylene construction cannot rust or corrode.
- Large sump capacity catches incidental spills.
- Work ramp hooks onto any workstation for easy loading.
- Heavy-duty removable structural foam grates for easy cleaning.
Portable spill-pallet
- Reusable, just fold and place on shelf.
- 1, 2, 4, 6, 8 drum spill-pallets.
- Foam flexible 4" sidewalls spring back to form after any applied pressure.
Low profile Spill-Pallets
- Low profile polyethylene spill-pallets strong enough to handle full IBCs.
- Translucent sidewalls offer convenient visual leak detection.
- 52"x52" deck.
- 4-way frokliftable entry.
- Versatile units can be used for drum containment also.
IBC Spill-Pallets
- Low profile 28" overall height.
- All polyethylene construction.
- Frokliftable.
- 52"x52" deck.
- 62"x62" footprint.
IBC Double-stack Spill-Pallets
- Double stack IBC tanks.
- 16,000 lb. Weight capacity.
- 100% polyethylene construction has no metal parts.
- 400-gallon sump.
IBC Spill-pallet IBC 2000i
- Exterior dimension 72"L x 80"W x 29"H.
- Pedestal dimension 55"L x 55.5"W x 29"H.
- Weight 308 lbs.
- 100% polyethylene construction has no metal parts.
- 385-gallon sump, forklift channels.
Poly-dolly
- It transports and dispenses 55-gallon drums.
- Tilts to become a self-dispensing station.
- Acts as its own secondary containment unit.
- Extra large easy-roll 10" wheels.
- Made of long-lasting tough polyethylene.
- Light weight only 92 lbs.
- Tough polyethylene construction, cannot rust or corrode.
- Large 80-gallon sump capacity.
Poly-spillcart
- 55-gallon capacity.
- Ergonomically designed handle for manoeuvrability.
- Tool tray.
- Tough polyethylene construction, cannot rust or corrode.
- Extra large easy-roll 10" wheels.
- Drain plug present for sump draining.
Racker-stacker shelf
- Combine a polly-racker with a polly-stacker to stack up to 4 drums.
- A one-piece polyethylene rack holds two 55-gallon drums, as does each polly-stacker. Each polly-stacker can be quickly stacked with a forklift.
- Any spills from the second or third level fall into the dispensing well for containment and easy clean up.
- The polly-shelf attaches to the polly-stacker and allows simultaneous dispensing from all drums.
Spill scooter
- Dispenses while transporting up to 55-gallon drums.
- Incidental spills are contained in the well.
- Spout for easy draining.
- Built in bung-holder fitting.
- Optional metal T-handle.
Drums-up
- Dispenses while transporting up to 55-gallon drums.
- Drums up to 55-gallon.
- 19.5-gallon sump.
Polly-collector
- Put mobility into containment so you can go where the waste is.
- Inner drum holds 55 gallons.
- Poly outer shell holds 105 gallons.
- Drum dolly.
- Twist down lid for safe and easy closure.
Cylinder products
- Dual & single cylinder dolly for up to 12" cylinders, pneumatic wheels.
- 2 & 4 cylinder stands, hold cylinders up to 12 3/8".
- 6 pack cylinder rack with optional ramp or caster frame.
- Multi-cylinder bumper brackets.
